YM1500
JOHN PETTIT
Join Date: Posts: 1 |
2003-05-20 55198
LIFT WILL NOT GO DOWN
Reply to | Quote Reply | Add Photo
YM1500
marklugo
Join Date: Jul 2003 Posts: 281 Tifton, GA Pics |
2003-05-21 55264
Control valve in lift is stuck or internal linkage has stuck. Is the pump "squeeling" ....
Reply to | Quote Reply | Add Photo
YM1500
JOHN PETTIT
Join Date: Posts: 1 |
2003-05-22 55319
YES PUMP WILL SQUEEL WHEN LEVER IS UP ....
Reply to | Quote Reply | Add Photo
YM1500
sjoneses
Join Date: Posts: 1 |
2003-08-12 61702
I have experienced this problem when there was no load on the lift arms. What I found (on several occasions I'm ashamed to say) was that with no load the arms tended to come up to a point where the 'shaft that drive them actually came out of its working region. To correct this I had to pull the back cover off and realign the shaft witht he hole then tap on the arms to get it started back through. Of course you could also have a valve problem where the speed control valve for the drop was not allowing the fluid to release. You should be able to check either one of these items with relative ease. ....
Reply to | Quote Reply | Add Photo
YM1500
DEEPWATERLEE
Join Date: Feb 2005 Posts: 1 WEBSTER, FL |
2005-04-04 109423
John did you ever find out what the problem was with your lift? I have the same problem. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This